1200-attachment-holder-for-tape-binder-200813103

You need the Tape binder attachment holder for the 1200d tape binder. buy online or call us on 1300137041-part number 200813103.

TAPE BINDER No need to pre-iron your bias strip; the tape binder automatically folds a 40 mm (1 1/2”) bias strip at the same time it is applied to the fabric edge. It is the per-fect finish for blankets, placemats and jackets. The binding is secured with the Chainstitch.

1. Select sewing program:(10) Chainstitch

2. Thread and set up machine as indicated on the ma-chine or in your instruction manual.

3. Attach A/B foot. Secure attachment holder base and attachment holder onto machine. See Figure 51.*

4. Cut a strip of bias tape 4 cm (1-1/2”) wide. Cut one end at a 45° angle. Insert cut angle into tape binder. Right side of fabric should face machine as it enters binder. Check that fabric is inserted correctly. Secure tape binder onto attachment holder. See Figure 52

5. Place bias tape under presser foot. Lower needle into folded bias tape. If necessary, reposition tape binder to have only 2 mm (1/8”) of folded bias on left side of needle. See Figure 53.

6. Insert fabric edge into slot between the folded bias tape. Lower the presser foot. Sew first two stitches by hand turning handwheel. Continue sewing at a medium speed. Check if fabric and tape are feeding correctly. Readjust binder position when necessary. See Figure 54.

Tape Binder:200-813-000Attachment Holder:]

200-813-10351525354*

NOTE: Front cover cannot open or close when attached