buy the elastic gathering foot 7.5mm. comes with the Elastic ghathering foot C as an optional extra. suits Janome 1200d and elna 845.
buy the elastic gathering foot 7.5mm. comes with the Elastic ghathering foot C as an optional extra. suits Janome 1200d and elna 845
COVER HEMMING ELASTIC GATHERS1.Select sewing program:10 Triple Cover Hem, Cover Hem Wide orCover Hem Narrow2. Thread and set up machine as indicated on the machine or in your instruction manual. Set SL above 3.5.FOLLOW steps 3 and 4 under “Overlocking Elastic Gathers”5. Position guide “D”; the elastic is centered under- neath needles. (Option: Press under fabric edge 1/4”. Place folded edge right side up under elastic.)6. Lower needles into fabric. Lower the presser foot. Sew first two stitches by hand turning handwheel. Test sew adjusting elastic gatherer for fullness. Sew at medium speed. See Figure 3 on page 1.HINT: Use a washable fabric marker to draw guide-lines for sewing multiple rows of elastic and create a unique shirring effect.CREATE CUSTOM SOUTACHE USING 7.5 MM ELASTIC GATHERER1. Select sewing program:(2) 3-Thread Stitch Wide2. Thread and set up machine as indicated on the machine or in your instruction manual with decorative thread in upper looper. Set Stitch Width Dial to widest width. Disengage (lower) cutting blade. 3. Attach elastic gathering foot. Snap elastic gatherer “A” onto elastic gathering foot. 4. Loosen adjustment screw “B” and insert 1/4” tape/ribbon into slot “C”. (Cut a generous length to allow for test sewing.) Pull tape/ribbon under foot and extend it behind foot.* 5. Position guide“D”; the tape/ribbon should be to the right of the needle and to the left of the needle plate edge. See Figure 2 on page 1. DO NOT tighten the adjustment screw. Lower needle (do not catch edge of tape/ribbon). 6. Lower the presser foot. Hand turn the handwheel and adjust Stitch Width Dial so stitching sur- rounds width of tape/braid. Continue turning handwheel and adjust Stitch Length Dial until desired look is achieved. Sew at medium speed. Hand sew braid onto project.Elastic Gathering Foot (C): 200-805-009 7.5 mm Elastic Gatherer: 200-805-102 10 mm Elastic Gatherer: 200-805-205 13 mm Elastic Gatherer: 200-805-308*NOTE:You may need to adjust SL for thicker threads.