Lowest Price Guarantee Australia Wide Shipping Price Match Guarantee
closed-icon
Sku: D Hoop For Mc10000

D Hoop For Janome 10000 And Mc350E

In Stock
Price Match Guarantee
Category: Hoops

The Embroidery hoop D is a Giga Hoop and it fits the following models Janome MC300e, MC350e, Mc 370e, MC9500, MC9700, MC10000 and MC10001. either order here or ring 1300137041

AU$300.00 incl. Tax
minus
plus
  • 25-Years 25+ Years in
    Business
  • Lowest-Price-Guarantee Lowest Price
    Guarantee
  • Australia-Wide-Shipping Australia Wide
    Shipping
  • Servicing-Repairs We Do Servicing
    & Repairs
  • Details

he Embroidery hoop D is a Giga Hoop and it fits the following models Janome MC300e, MC350e, Mc 370e, MC9500, MC9700, MC10000 and MC10001.either order here or ring 1300137041

Part number 850 406 009

Easy Giga Hoop Overview

When used with EasyGigaHoop software, your creativity is  endless! It is necessary, however, to understand how the software works, how the Giga Hoop works, and how they both work together with the  Memory Craft 10000.

The Giga Hoop is the “star” of the Memory Craft 10000 family of  accessories. In terms of actual area that can be sewn, its 9.1″ x 7.9″  area 230MM  x 200CM  is the largest in the home sewing industry.

When used with EasyGigaHoop software, your creativity is endless! It  is necessary, however, to understand how the software works, how the  Giga Hoop works, and how they both work together with the Memory Craft  10000.

Giga Hoop

The Giga Hoop allows you to sew large designs without rehooping.

Embroidery designs are created in two sections, a right side and a  left side, in the EasyGigaHoop software. It is then sewn in two passes:

  1. The Giga Hoop is attached to the carriage arm with a removable turnkey.
  2. Position #1 is the right side of the design (design1). This is sewn first.
  3. The Giga Hoop is removed from the Memory Craft 10000.
  4. The removable turnkey that holds the Giga Hoop to the carriage arm is removed from position #1.
  5. The Giga Hoop is turned around 180_.
  6. The removable turnkey is inserted into the Giga Hoop at position #2.
  7. The Giga Hoop is attached to the carriage arm.
  8. The left side of the design (design2) is sewn upside down.

Each of the two designs that make up the one Giga  Hoop design is the size equivalent of the Large Hoop “B” (5.5″ x 7.9″).  Each of the two designs may be 2/3 the size of the Giga Hoop. The  designs may overlap in the center of the Giga Hoop.

Think of the Giga Hoop as merging two Large Hoops “B”. The right side hoop is upright, and overlaps the left side hoop, which is upside down.

Right side position #1

Left side position #2

EasyGigaHoop

EasyGigaHoop software is a layout  program that allows you set up designs for the Giga Hoop. After designs  are positioned in a layout, they can be saved as an *.arg (arrangement  file) so they can be reused.

EasyGigaHoop has the same communication functions as EasyImport, in  that you can send your layout to the Memory Craft 10000 via USB, RS232C  or ATA PC Card.

EasyGigaHoop has a layout screen that approximates the size and the arrangement of the Giga Hoop.

EasyGigaHoop will not permit you to place a design solely in the  overlap area. Designs are only allowed within the left side or right  side areas.

When a design is sent to the Memory Craft 10000 or written to an ATA  PC Card, EasyGigaHoop will split the design into two. The right side of  the design is sent to the sewing machine as design1, upright. The left  side of the design is sent as design 2, upside down.

Memory Craft 10000

Once the design is sent to the Memory Craft 10000, it will appear as two separate designs for the  Large Hoop “B”. An arbitrary letter will be assigned to the two designs. For example, if the letter is “D,” then the right side (upright) design will be named as “D-1.” The left side design, which is now upside down, is designated as “D-2.”

To sew the design, start with D-1. You select it on the screen by  pressing the thumbnail image. Attach the Giga Hoop, with the removable  turnkey inserted into position #1. You sew the entire right side of the  design.

When it is completed, you remove the Giga Hoop and removable turnkey. Turn the Giga Hoop around 180_. Insert the removable turnkey into  position #2. Attach the Giga Hoop to the carriage arm. Select the D-2  design and stitch to complete the Giga design.

Google Rating
4.2
Based on 55 reviews
×
js_loader
Google Rating
4.2
Based on 55 reviews
×
js_loader