Lace attachment guide for Janome 1200d-H1

buy the Lace attachment H1 from the sewing machine company. buy on line or ring us on 1300137041. Part number 200801005

Click here for info on all parts fitting the Janome 1200d

COVER HEM FOOT (M) AND LACE ATTACHMENT GUIDE (H-1)The Cover Hem stitch is used by professionals as a hemming method. This efficient and clever lace attachment guide folds under perfect 6 mm (1/4”) hemmed edges. At the same moment it’s hemming, it attaches lace or trim placed underneath the fabric. This method of hemming is best accomplished when sewing a hem flat. The side seam is sewn after lace application.FOLD UNDER 1/4” COVER HEM AND ADD LACE TRIM 1. Select sewing program:(10) Triple Cover Hem or Cover Hem Wide 2. Thread and set up machine as indicated on the machine or in your instruction manual. 3. Attach cover hem foot.4. Fold or finger press approximately 5 cm (2”) of the fabric under 6 mm (1/4”) to form hem. Place folded edge into H-1 guide. See Figure 10.5. Raise presser foot, snap guide onto the foot; and slide fabric underneath presser foot. Place lace on the right side of H-1 guide and underneath presser foot, using tweezers as needed. Lower presser foot. See Figure 11.*6. Sew first two stitches by hand turning the hand- wheel. Hold fabric in your left hand and lace in your right hand and continue sewing. Check fabric and lace placement in H-1 guide. See Figure 12.Cover Hem Foot (M): 200-801-304Lace Attachment Guide (H-1): 200-801-00